Research and improvement of methods of testing machines for geometric and kinematic accuracy

Authors

  • В.А. Дербаба Національний технічний університет «Дніпровська політехніка», Дніпро, Україна Author
  • В.С. Носачов Національний технічний університет «Дніпровська політехніка», Дніпро, Україна Author
  • З.М. Різо Національний технічний університет «Дніпровська політехніка», Дніпро, Україна Author

DOI:

https://doi.org/10.33271/crpnmu/64.198

Keywords:

metal-cutting machine, rigidity, vibration resistance, reliability, measurement, testing, accuracy

Abstract

Purpose. To analyze and check for adequacy the known calculation formulas in determining the geometric and kinematic accuracy, statistical and dynamic rigidity and testing the machine for technological reliability. To carry out comparative calculations to simplify the methodology of complex tests of metal-cutting machines of the universal group. To select and improve the measuring equipment during the complex tests of the milling machine. Methodology. The research is based on the use of analytical methods for calculating the static rigidity coefficient, additional calculation of the measuring instrument design due to the gear ratio, the angle of rotation of the lever and the theoretical error of the displacement mechanism based on the known probability distribution theorem. Findings. The formulas of researches of the coefficient of static rigidity, the mechanism of the measuring device, the angle of rotation of the lever, the theoretical error of the mechanism of movement and the density of probability of distribution of the angle of the lever mechanism of the indicator of tangent type has been obtained. Originality. The research has been carried out and the parametric relationship between the static rigidity coefficient in the design of the spindle assembly of the vertical milling machine with the error of the calculations of the design, the departure of the spindle cone and the location between the supports has been established. The values and functional dependences of the amplitude of oscillations on the maximum allowable spindle speeds and feed rates at which the surface roughness of the workpiece reaches the specified geometric limits has been obtained. It is experimentally confirmed that the parameters of the system of pre-planned repairs are directly related to the reliability of the machine. The resource on the accuracy of the machine determines the need for overhaul, and the repair period depends on the service life of parts and elements of the machine. The actual service life should be a multiple of the repair period, as the restoration of the part is planned during the current repair. Practical value. The practical achievement of the obtained results is to confirm the adequacy of the known calculation formulas in determining the geometric and kinematic accuracy, statistical and dynamic rigidity and testing the machine for technological reliability. On the basis of the received analytical and settlement data was made the simplified complex technique of test of the metal-cutting machine during the:

References

Кіпчарський, В. П. (2018). Металорізальні верстати : навчальний . ДВНЗ «ПДТУ»

Шевченко, О.В. & Бєляєва, А.Ю. (2019). Металорізальні верстати. Кінематичний аналіз. Практикум до виконання практичних та лабораторних робіт [Електронний ресурс]: Навч. посібник для студ. спеціальностей 131 «Прикладна механіка» та 133 «Галузеве машинобудування», спеціалізації «Металорізальні верстати та системи»; КПІ ім. Ігоря Сікорського. – Електронні текстові данні. – Київ : КПІ ім. Ігоря Сікорського, 86с

Zhuravel, O . Yu , Derbaba, V.A., Protsiv, V.V., & Patsera, S.T. (2019). Interrelation between Shearing Angles of External and Internal Friction During Chip Formation. Solid State Phenomena. Materials Properties and Technologies of Processing, (291), 193-203. https://doi.org/10.4028/www.scientific.net/SSP.291.193

Кравченко, Ю.Г., Дербаба, В.А.&Крюкова, Н.В. (2015). К вопросу эмпирического определения напряжений и коэфициентов трения при стружкообразовании. Резание и инструмент в технологических системах: Междунар. науч.-техн. сб. Харьков: НТУ «ХПИ», (85), 137-148

Derbaba V.A., Zil , V.V., & Patsera, S.T. (2014). Evaluation of the adequacy of the statistical simulation modeling method while investigating the components presorting processes. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 45-50

Кравченко, Ю.Г., Дербаба, В.А. & Смагін, Д.В. (2020). Визначення і взаємозв’язок кутів зсуву і тертя при стружкоутворенні. Збірник наукових праць НГУ. – Дніпро: Національний ТУ «Дніпровська політехніка», 61, 193-201. https://doi.org/10.33271/crpnmu/61.193

Kravchenko,Yu., & Derbaba, V. (2021). Empirical definition of the shearing angle and chip-edge contact length when cutting. Збірник наукових праць НГУ. – Дніпро: Національний ТУ «Дніпровська політехніка», 63, 123-133. https://doi.org/10.33271/crpnmu/63.123

Downloads

Published

2020-01-01

Issue

No. 64 (2021)

Section

Статті

License

All articles are published under the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Authors retain copyright and grant the journal right of first publication.

Authors are permitted and encouraged to deposit the final published version of their article, or the Author's Accepted Manuscript (AAM), in institutional or subject-specific open-access repositories (including the university's own institutional repository, CORE, Zenodo, or Figshare), ensuring maximum visibility, accessibility, and impact of the publication.