Substantiation of the rational installation location of a dragline excavator in the face when working with dump trucks
DOI:
https://doi.org/10.33271/crpnmu/60.143Keywords:
dragline, angle of rotation, dump truck, bench width, bench face, rational location.Abstract
The goal. To substantiate the rational location of the dragline excavator in the bottom, when working in combination with dump trucks, to reduce the overall angle of rotation. Object of study. Mining and loading works of complexes of the mining transportation equipment "dragline + dump truck". Subject of study. Bench face parameters and location of dragline excavator in the bench face. Methods. Establishing a rational place for the installation of dragline excavator in the bench face by determining the total angle of rotation for dragline placed at different positions, was carried out. The algorithm includes the analysis of scientific and technical publications, a graphoanalytical method for modeling the operation of a dragline excavator in combination with a dump truck, and a mathematical modeling method for establishing the relationship between the location of the excavator and the angle of rotation. Results. Formulas for determining the total angle of rotation of a dragline, with its location at a distance of B, 0,5A, 0,75A and A from the crest of bench, were obtained. The dependence of the total angle of rotation of the dragline on the bench width is established. It is established that at the bench width from 16.5 m to 43 m, the value of the total angle of rotation at the different positions of the excavator is almost unchanged. The rational position when working dragline in combination with dump trucks is the location of the excavator at a distance of 0.5A from the crest of bench. Scientific novelty. To determine the rational location of the dragline during its work in combination with dump trucks, two new formulas for determining the total angle of rotation for different positions of the excavator in the bottom were developed. For the first time, the effect of the dragline installation location on the overall angle of rotation was analyzed.This allowed us to determine the rational position of the excavator in the bench width. Practical importance. The developed technique allows us to determine the rational location of the dragline in the face, for different schemes of excavator work in combination with dump trucks, which will allow us to optimize the working cycle of the excavator and increase its productivity.References
Собко, Б.Ю., Маєвський, А.М., & Чебанов, М.О. (2015) Встановлення залежності кута повороту від ширини заходки та висоти уступу, при розвантажуванні драглайна у автосамоскид. Збірник наукових праць Національного гірничого університету , 49, 81-86
Собко, Б.Ю., & Чебанов, М.О. (2017) Безпечні параметри вибою екскаватора драглайна при навантаженні автосамоскидів. Збірник наукових праць Національного гірничого університету , 52, 8-16
Downloads
Published
Issue
Section
License
All articles are published under the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Authors retain copyright and grant the journal right of first publication.
Authors are permitted and encouraged to deposit the final published version of their article, or the Author's Accepted Manuscript (AAM), in institutional or subject-specific open-access repositories (including the university's own institutional repository, CORE, Zenodo, or Figshare), ensuring maximum visibility, accessibility, and impact of the publication.
