Justification of non-traditional energy-conserving measures in power equipment of substations
DOI:
https://doi.org/10.33271/crpnmu/79.231Keywords:
енергозбереження, коефіцієнт перетворення, парова мікротурбіна, силовий трансформатор, тепловий насос, утилізація теплоти.Abstract
Purpose. Analysis and justification of the use of a heat pump method of utilizing heat emissions in the cooling system of a powerful power transformer for various energy consumption schemes with subsequent recommendation of the most rational options. The methods. When developing the calculation methodology, methods of analysis and mathematical modeling of thermodynamic processes occurring during the refrigeration cycle of a heat pump, as well as steam processes in a microturbine, were used. Findings. An assessment of previously developed proposals for the transformation of electrical energy into thermal energy in various sources of electrical generation was carried out. The need for the introduction of non-traditional energy-saving technologies for the utilization of heat emissions of powerful power transformers was substantiated. According to the results of the research, it was determined that the most rational scheme for using a heat pump in the system for the utilization of heat emissions of a power transformer TDNM - 160 MVA/330 kV is a heating scheme, which has clear advantages in terms of energy saving (savings of conventional fuel by more than 4 times compared to a boiler) and requires significantly lower capital and operating costs compared to other schemes. The possibility of significant savings in conventional fuel (8%) when using a heat pump for preheating feed water for a microturbine is substantiated. The originality. Mathematical dependences of the heat pump parameters were obtained to study unconventional methods of its application in the cooling system of powerful power transformers in order to utilize heat emissions for the needs of various power plants with the determination of rational modes of their operation. Practical implementation. A comprehensive calculation methodology has been developed that takes into account specific parameters of the power transformer, steam power and heating plants, characteristics of the refrigerant, refrigeration cycle and other parameters of the heat pump and allows determining rational operating modes of power equipment and making recommendations on the possibility of using a heat pump in certain schemes of power plants.References
1. Олішевський, І.Г., & Олішевський, Г.С. (2021). Автоматизована методика розрахунку параметрів для нетрадиційних технологій опалення та кондиціонування будівель. Електротехніка та електроенергетика, 3 , 40–47. https://doi.org/10.15588/1607-6761-2021-3-4
2. Wang, Z., Luo, M., Geng, Y., Lin, B., & Zhu, Y. (2018). A model to compare convective and radiant heating systems for intermittent space heating. Applied Energy, 215 , 211–226. https://doi:10.1016/j.apenergy.2018.01.088
3. Christoph F. Reinhart, & Carlos Cerezo Davila. (2016). Urban building energy modeling – A review of a nascent field, Building and Environment , 97, 196–202. https://doi.org/10.1016/j.buildenv.2015.12.001
4. Ryan E. M., & Sanquist T. F. (2012). Validation of building energy modeling tools under idealized and realistic conditions. Energy and Buildings, 47 , 375–382. https://doi.org/10.1016/j.enbuild.2011.12.020 .
5. Cao X., Dai X., & Liu J. (2016). Building energy-consumption status worldwide and the state-of-the-art technologies for zero-energy buildings during the past decade. Energy and Buildings, 128 , 198–213. https://doi.org/10.1016/j.enbuild.2016.06.089
6. Olishevskyi I., Gusev O., & Olishevskyi H. (2023). Automated methodology of calculating parameters for non-traditional technology of heating mode of hydro-storage power plant station. Електротехніка та електроенергетика, 1 , 36–42. https://doi.org/10.15588/1607-6761-2023-1-4
7. Olishevskyi, I. H. (2024). Substantiation of energy efficiency of automated heating technology at HPS. Електротехніка та електроенергетика, 2 , 36–43. https://doi.org/10.15588/1607-6761-2024-2-4
8. Разумний,Ю. Т., Заїка,В. Т., & Степаненко,Ю. В. (2005). Енергозбереження: навч. посіб . Дніпропетровськ: Видавництво Нац. гірн. ун-ту.
Downloads
Published
Issue
Section
License
All articles are published under the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Authors retain copyright and grant the journal right of first publication.
Authors are permitted and encouraged to deposit the final published version of their article, or the Author's Accepted Manuscript (AAM), in institutional or subject-specific open-access repositories (including the university's own institutional repository, CORE, Zenodo, or Figshare), ensuring maximum visibility, accessibility, and impact of the publication.
