The development of technology schemes of formation of external dump of different types of rock in landslide conditions
DOI:
https://doi.org/10.33271/crpnmu/66.105Keywords:
зовнішній відвал, геомеханічні дослідження, стійкість укосу відвалу, утворення зсуву, фізико-механічні властивості гірських порід, технології поновлення роботи на відвалі в умовах зсуву, техніко-економічні показники.Abstract
Purpose. The scientific and practical purpose of the study is to develop and substantiate technological schemes for the formation of external dumps in conditions of impaired stability during the development of iron ore deposits. Research methods. To solve the problem, the following research methods were used: geo-mechanical methods for studying changes in the stress-strain state, modeling of technological solutions by variants and graph-analytical method for calculating the stability of slopes for different variants for the development of work on the dump. Findings. The use of the technique to determine the stability of the dump sides allowed to calculate the parameters and determine the prisms of possible landslide. The safety factors or different variants of work development are obtained, on the basis of which the most expedient way of restoration of dump works in conditions of the formed landslide is chosen. Technological schemes have been proposed and developed for the external dump No 2 of the Central Mining and Processing Plant, which allow to continue its operation in future. Originality. When carrying out works in conditions of the formed landslide two variants of the further operation of a dump are modeled: a) with landslide removal without land allotment; b) without landslide removal with the formation of a supporting prism and with the land allocation. Geo-mechanical studies of changes in the stress-strain state in the area of landslide formation were carried out in order to forecast the risk of formation of new centers of geodynamic phenomena and develop measures to prevent them. Practical implications. Based on the constructed sections of the dump and certain physical and mechanical properties, the safety factors were obtained for different variants for the development of works, which made enabled to determine the appropriate variant to eliminate the effects of the dump landslide. The developed technological schemes of development of works allow to operate safely an external dump No 2 of the PJSC Central Mining and Processing Plant.References
Дриженко, А.Ю. (2011). Карьерные технологические горнотранспортные системы: монография. Національний гірничий університет
Дриженко, А.Ю. (1985). Восстановление земель при открытых разработках: монография . Недра
Фисенко,Г.Л.(1965). Устойчивость бортов карьеров и отвалов. 2-е изд. перераб. и доп. Недра
Новожилов, М.Г. (1961). Открытые горные работы: учеб. Госгортехиздат
Русский, И.И. (1979). Технология отвальных работ и рекультивация на карьерах: монография. Недра
Томаков, П.И. & Наумов, И.К. (1992). Технология, механизация и организация открытых горных работ: монография. МГИ
Babets, Y., Anisimov, O., Shustov, O., Komirna, V., & Melnikova, I. (2021). Determination of economically viable option of liquidation the consequences of external dump deformation. E3S Web of Conferences, 280 , 08014. https://doi.org/10.1051/e3sconf/202128008014
Дриженко, А. Ю., Адамчук, А. А., Тамуя, С. А., & Тельнов, В. Г. (2018). Дослідження параметрів внутрішніх відвалів у виробленому просторі відпрацьованих глибоких кар'єрів. Збірник Наукових Праць Національного Гірничого Університету, 53 , 56–65
Pavlychenko, A., Adamchuk, A., Shustov, O., & Anisimov, O. (2020). Justification of dump parameters in conditions of high water saturation of soils. Technology Audit and Production Reserves, 6 (3(56)), 22–26. https://doi.org/10.15587/2706-5448.2020.218139
Downloads
Published
Issue
Section
License
All articles are published under the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Authors retain copyright and grant the journal right of first publication.
Authors are permitted and encouraged to deposit the final published version of their article, or the Author's Accepted Manuscript (AAM), in institutional or subject-specific open-access repositories (including the university's own institutional repository, CORE, Zenodo, or Figshare), ensuring maximum visibility, accessibility, and impact of the publication.
