Improvement of the current methodology
DOI:
https://doi.org/10.33271/crpnmu/71.062Keywords:
industrial explosive, emulsion explosive, drilling and blasting, explosive operability factor, line of least resistanceAbstract
Purpose. Improvement of the current methodology for calculating the parameters of drilling and blasting (D&B) by determining the explosive force by the degree of realization of the detonation velocity for all types of industrial explosives (IE). The methodology of research. To solve the problem, a systematic approach was used, including an analysis of the current industry methodology for calculating the parameters of D&B in underground ore mining using IE, improvement of the power-law dependence of the calculation of the line of least resistance (LLR) of charges by determining the coefficient of explosive force of the IE, taking into account the degree of implementation of the burning rate, as well as approbation of the improved technique in the conditions of the operating iron ore mine. Findings. According to the methodology for determining the coefficient of explosive force of explosives (EX) according to the degree of implementation of the burning rate and according to the results of experimental studies of the change in the burning rate of the bulk emulsion explosive (EE) Ukrainit-PP-2, an improvement is proposed for the current industry methodology for calculating the parameters of D&B for the mines of the Kriviy Rig basin and the Private Joint Stock Society "Zaporozhye iron ore plant" (PJSS "ZIOP"). This made it possible, in the conditions of the experimental block of the mine "Yubileinaya" of the PJSS "Sukhaya Balka", using the bulk EE Ukrainit-PP-2, to increase the LLR and the distance between the borehole bottom up to 17%, and to obtain good results of ore reduction. The originality. The well-known power-law dependence of the determination of the LLR of borehole for rock breaking has been improved through the refinement of the coefficient of explosive force of the IE, which takes into account the degree of realization of the burning rate EX. Practical implications. The results of the research have improved the power-law dependence of the calculation of the LLR on the explosive force, taking into account the degree of implementation of the burning rate, the use of which will allow rationalizing the parameters of the D&B when breaking the ore mass using all types of IE.References
1. Кононенко, М.М., Хоменко, О.Є., & Косенко, А.В. (2022). Чисельне моделювання лінії найменшого опору при підриванні зарядів. Збірник наукових праць НГУ, 69 , 43–57. https://doi.org/10.33271/crpnmu/69.043
2. Афанасьєв, Є.В., & Нусінов, В.Я. (2013). Стратегічні напрямки гірничо-металургійного комплексу щодо вирішення завдань загальнодержавної програми розвитку мінерально-сировинної бази України. Ефективна економіка, 5 . http://www.economy.nayka.com.ua/?op=1&z=2061
3. Kosenko,A.V. (2021) Research and substantiation of rational parameters of drilling and blasting operations when using emulsional explosives in underground mining. Geo-Technical Mechanics, (158) , 33–43. https://doi.org/10.15407/geotm2021.158.033
4. Kononenko, M., Khomenko, O., Kovalenko, I., & Savchenko, M. (2021). Control of density and velocity of emulsion explosives detonation for ore breaking. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 69–75. https://doi.org/10.33271/nvngu/2021-2/069
5. Pysmennyi, S., Brovko, D., Shwager, N., Kasatkina, I., Paraniuk, D., & Serdiuk, O. (2018). Development of complex-structure ore deposits by means of chamber systems under conditions of the Kryvyi Rih iron ore field. Eastern-European Journal of Enterprise Technologies, 5 (1(95)), 33–45. https://doi.org/10.15587/1729-4061.2018.142483
6. Pysmennyi, S., Fedko, M., Shvaher, N., & Chukharev, S. (2020). Mining of rich iron ore deposits of complex structure under the conditions of rock pressure development. E3S Web of Conferences, 201 , 01022. https://doi.org/10.1051/e3sconf/202020101022
7. Коваленко, И.Л., Ступник, Н.И., Короленко, М.К., Полторащенко, С.П., Карапа, И.А., Киященко, Д.В., & Небогин, В.З. (2016). Особенности технологии формирования скважинных зарядов эмульсионными ВВ Украинит в подземных условиях. Вісник Криворізького національного університету , (41), 3–6.
8. Кононенко, М.М., Хоменко, О.Є., Коваленко, І.Л., & Миронова, І.Г. (2022) Дослідження густини та швидкості детонації емульсійних вибухових речовин. Збірник наукових праць НГУ, 68 , 43–57. https://doi.org/10.33271/crpnmu/68.043
9. Небогін, В.З. Ступнік, М.І., Коваленко, І.Л., Короленко, М.К, Полторащенко, С.П., Карапа, І.А., Шевчик, Д.В., & Кіященко, Д.В. (2019). Розробка інноваційних природоощадних технологій видобутку та їх комплексне впровадження на залізорудних шахтах України. Інформаційний бюлетень Української спілки інженерів-підривників, 1 (37), 3–9.
10. Мартинов, В.К., & Федько, М.Б. (2008). Розрахунки основних виробничих операцій, процесів та систем розробки рудних родовищ . Видавничий центр КТУ.
11. Капленко, Ю.П. (1982). Методические указания по расчету параметров буровзрывных работ . КГРИ.
12. Капленко, Ю.П. (1977). Инструкция по выбору параметров БВР при отбойке руды глубокими скважинами . КГРИ.
13. Кононенко, М.М., Хоменко, О.Є., & Коробка, Є.О. (2021). Параметри буропідривних робіт для проведення гірничих виробок. Физико-технические проблемы горного производства, (23), 54–71. https://doi.org/10.37101/ftpgp23.01.004
14. Kononenko, M., Khomenko, O., Savchenko, M., & Kovalenko, I. (2019). Method for calcu-lation of drilling-and-blasting operations parameters for emulsion explosives. Mining Of Mineral Deposits, 13 (3), 22–30. https://doi.org/10.33271/mining13.03.022
15. Guang, Wang Xu. (1994). Emulsion explosives . Metallurgical Industry Press.
16. Khomenko, O., Kononenko, M., & Savchenko, M. (2018). Technology of underground mining of ore deposits . DUT. http://doi.org/10.33271/dut.001
17. Khomenko, O., Kononenko, M., & Kosenko, A. (2022). Processes of underground mining of ore deposits . DUT. http://doi.org/10.33271/dut.002
Downloads
Published
Issue
Section
License
All articles are published under the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Authors retain copyright and grant the journal right of first publication.
Authors are permitted and encouraged to deposit the final published version of their article, or the Author's Accepted Manuscript (AAM), in institutional or subject-specific open-access repositories (including the university's own institutional repository, CORE, Zenodo, or Figshare), ensuring maximum visibility, accessibility, and impact of the publication.
