Rationalization of combination of individual production processes as a factor of reduction of duration of implementation of innovative building products
DOI:
https://doi.org/10.33271/crpnmu/67.104Keywords:
planning and organization of construction production, combination of works, additive technologies, 3D printing, construction duration, construction flows.Abstract
Purpose. Reducing the duration of construction projects, based on modeling the rational combination of technological processes that take into account the constraints imposed by innovative technologies and improving methods of planning and organization of construction production, which will reduce organizational errors. The methods. The analysis of conditions of restriction on combination of technologically dependent works is executed. A mathematical model has been developed that reflects the set bilateral restrictions on the combination of technologically related works. A method has been developed that allows to determine the rational start and end of flow work on all grippers, taking into account the set bilateral restrictions on their combination with the continuity of critical work. Findings. A model and method of linking the work of specialized construction flows have been developed, taking into account the bilateral constraint on the combination of processes, which provides for modern innovative construction projects, which reduces the duration of construction projects and eliminates errors in planning and organizing construction. The originality. The expediency of taking into account the bilateral restriction on the combination of processes in the calculation of construction flows under the condition of continuous critical work is theoretically substantiated - done for the first time. The developed concept differs in that the restriction on the combination of technologically dependent works can be imposed simultaneously by combining technologically previous and subsequent works. Practical implimintation. Reducing the duration of the stages of construction project cycles in Ukraine to the requirements of modern world standards through innovative planning of production processes taking into account the rational combination of construction flows both in time and space.References
Егоров, А. Н., Шприц, М. Л., & Нагманова, А. Н. (2011). Инновационность в строительной сфере экономики как инструмент снижения стоимости, сокращения сроков и повышения качества строительства. Проблемы современной экономики, 3 , 251-252
Лаухін, Д.В., Дадіверіна, Л.М., Твердохліб, О.М., & Мацюк, І.М. (2020). Аналіз застосування в будівельному виробництві адитивних технологій 3D-друку. Збірник наукових праць НГУ , 61 ,163-177 https://doi.org/10.33271/crpnmu/61.163
Борута, Я. (2017). Как работает метод критического пути (CPM) для продуктового бизнеса? https://worksection.com/blog/cpm.html
Дикман, Л.Г. (2006). Организация строительного производства . Учебник для строительных вузов . Издательство Ассоциации строительных вузов
Кирнос, В.М., Залунин, В.Ф., & Дадиверина, Л.Н. (2005). Организация строительства. Порог
Фатхутдинов, Р.А. (2001). Организация производства: Учебник. ИНФРА-М
Ковальчук,Я.О. (2017). Технологія та організація будівництв: Навчальний посібник . Тернопіль
Ушацький, С.А., Шейко, Ю.П., & Тригер, Г.М. (2007). Організація будівництва . Підручник . (за редакцією С.А. Ушацького) . Київ: Кондор
Дадиверина, Л.Н., & Одинский., В.Г.(2012). Методика расчета строительных потоков при условии непрерывности выполнения работ и двухстороннем ограничении на совмещение работ. Вісник Придніпровської державної академії будівництва та архітектури , 7-8 ,101-106
Дадиверина,Л.Н.(2010) Методика расчётов строительных потоков при условии непрерывной загрузки фронтов работ и двустороннего ограничения на их совмещение. Вісник Придніпровської державної академії будівництва та архітектури, 4-5 , 31-37
Downloads
Published
Issue
Section
License
All articles are published under the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Authors retain copyright and grant the journal right of first publication.
Authors are permitted and encouraged to deposit the final published version of their article, or the Author's Accepted Manuscript (AAM), in institutional or subject-specific open-access repositories (including the university's own institutional repository, CORE, Zenodo, or Figshare), ensuring maximum visibility, accessibility, and impact of the publication.
