On the issue of the rational planning of mining operations for underground coal
DOI:
https://doi.org/10.33271/crpnmu/80.081Keywords:
coal gasification, underground gasifier, gasified cavity, borehole, operational losses, development systemAbstract
Purpose. To substantiate the spatial layout parameters of underground gasifiers, considering the operational losses of coal within the mine field. Methods. The underground coal gasification process was studied under laboratory conditions through physical modeling of a coal seam using a specialized stand-based setup. This approach enables reproducing key elements and parameters of the gasification process in a controlled environment. The setup simulates the characteristics of coal seam occurrence, within which operational boreholes are formed – one for supplying the blast mixture (air, oxygen, or steam) and another for extracting the producer gas. Results. The study examined the formation parameters of the gasified cavity of the underground gasifier at the late stage of mining during coal gasification via vertical boreholes. Quantitative indicators of coal conversion were established for the gasification of thin coal seams. A comparative analysis of operational coal losses within the mine field was conducted for two development systems: one with the parallel placement of underground gasifiers and another involving zonal distribution of losses within the gasifiers. Originality. It has been established that the maximum width of the underground gasifier (13.9–15.4 m) and the length of the combustion front (33.6–37.3 m) at the final stage of gasification directly depend on the thickness of the coal seam (0.7–1.2 m). It was revealed that the gasifier width follows an exponential growth pattern while the combustion front length changes according to a logarithmic relationship. These dependencies are essential for predicting the dynamics of gasified cavity development in underground gasifiers and determining optimal locations for operational boreholes. Practical implication. A coal seam development system that includes zonal distribution of losses within underground gasifiers’ boundaries is proposed based on the cavity formation parameters at the late mining stage. An algorithm is also proposed to estimate operational coal losses during underground gasification.References
1. Burton, E., Upadhye, R., & Friedmann, S. (2019). Best Practices in Underground Coal Gasification. Office of Scientific and Technical Information (OSTI). https://doi.org/10.2172/1580018
2. Saik, P., Petlovanyi, M., Lozynskyi, V., Sai, K., & Merzlikin, A. (2018). Innovative Approach to the Integrated Use of Energy Resources of Underground Coal Gasification. Solid State Phenomena , 277 , 221–231. https://doi.org/10.4028/www.scientific.net/ssp.277.221
3. Kačur, J., Laciak, M., Durdán, M., & Flegner, P. (2023). Investigation of Underground Coal Gasification in Laboratory Conditions: A Review of Recent Research. Energies , 16 (17), 6250. https://doi.org/10.3390/en16176250
4. Perkins, G. (2018). Underground coal gasification – Part I: Field demonstrations and process performance. Progress in Energy and Combustion Science , 67 , 158–187. https://doi.org/10.1016/j.pecs.2018.02.004
5. Falshtynskyi, V., Saik, P., Lozynskyi, V., Dychkovskyi, R., & Petlovanyi, M. (2018). Innovative aspects of underground coal gasification technology in mine conditions. Mining of Mineral Deposits , 12 (2), 68–75. https://doi.org/10.15407/mining12.02.068
6. Xin, L., Wang, Z., Wang, G., Nie, W., Zhou, G., Cheng, W., & Xie, J. (2017). Technological aspects for underground coal gasification in steeply inclined thin coal seams at Zhongliangshan coal mine in China. Fuel , 191 , 486–494. https://doi.org/10.1016/j.fuel.2016.11.102
7. Pivnyak, G., Falshtynskyi, V., Dychkovskyi, R., Saik, P., Lozynskyi, V., Cabana, E., & Koshka, O. (2020). Conditions of Suitability of Coal Seams for Underground Coal Gasification. Key Engineering Materials , 844 , 38–48. https://doi.org/10.4028/www.scientific.net/kem.844.38
8. Дичковський, Р.О. (2013). Наукові засади синтезу технологій видобування вугілля із тонких та надтонких пластів у слабометаморфізованих породах . Дніпропетровськ, Україна: Національний гірничий університет, 262 c.
9. Marciniak-Kowalska, J., Niedoba, T., Surowiak, A., & Tumidajski, T. (2014). Multi-CriteriaEvaluation of Coal Properties in Terms of Gasification. Archives of Mining Sciences , 59 (3), 677–690. https://doi.org/10.2478/amsc-2014-0047
10. Соцков, В.О., Загриценко, А.М., & Деревягіна, Н.І. (2019). Обґрунтування гірничо-геологічних параметрів застосування ресурсозберігаючої технології селективної відробки вугільних пластів для Західного Донбасу. Вчені записки Таврійського національного університету імені В.І. Вернадського. Серія: Технічні науки , 30 (69), 17–23. https://tech.vernadskyjournals.in.ua/journals/2019/6_2019/part_2/6-2_2019.pdf
11. Саїк, П.Б., & Янкін, Д.В. (2024). Формування методики досліджень водневоорієнтованої технології підземної газифікації вугілля. Науковий вісник ДонНТУ , 1 (12), 129–138. https://doi.org/10.31474/2415-7902-2024-1-12-129-138
12. Hamanaka, A., Su, F., Itakura, K., Takahashi, K., Kodama, J., & Deguchi, G. (2017). Effect of Injection Flow Rate on Product Gas Quality in Underground Coal Gasification (UCG) Based on Laboratory Scale Experiment: Development of Co-Axial UCG System. Energies , 10 (2), 238. https://doi.org/10.3390/en10020238
13. Саїк, П.Б., Лозинський, В.Г., Фальштинський, В.С., Демидов, М.С., & Ганушевич, К.А. (2019). Дослідження матеріально- теплових показників процесу газифікації вугілля. Збірник наукових праць НГУ , (57), 32–44. https://doi.org/10.33271/crpnmu/57.032
14. Sakhno, I., Sakhno, S., & Vovna, O. (2025). Surface Subsidence Response to Safety Pillar Width Between Reactor Cavities in the Underground Gasification of Thin Coal Seams. Sustainability , 17 (6), 2533. https://doi.org/10.3390/su17062533
Downloads
Published
Issue
Section
License
All articles are published under the Creative Commons Attribution License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Authors retain copyright and grant the journal right of first publication.
Authors are permitted and encouraged to deposit the final published version of their article, or the Author's Accepted Manuscript (AAM), in institutional or subject-specific open-access repositories (including the university's own institutional repository, CORE, Zenodo, or Figshare), ensuring maximum visibility, accessibility, and impact of the publication.
