Collection of Research Papers of the National Mining University

Current Issue

No. 86 (2026)

DOI: https://doi.org/10.33271/crpnmu/86

Published: 2026-09-30

Full Issue

MINING AND OIL AND GAS TECHNOLOGIES

Seismoacoustic diagnostics and environmental impact assessment of mass blasting at the Rokytne Special Quarry

A. Han, V. Boiko, V. Korobiichuk, T. Khlevniuk, O. Han, D. Bilobrov

7–22
- PDF (Ukrainian)
Improving the method of sealing threaded casing joints by using anaerobic sealants

A. Zelinskyi, Ya. Femyak, V. Artym, V. Mykhailiuk, I. Artym

23–40
- PDF
Some features of the design and application of innovative downhole drilling devices

A. Ihnatov, V. Litvinov, I. Askerov

41–54
- PDF (Ukrainian)
Control of the stress-strain state of the coal seam rock mass in the transition zone during face operations past a mine working

O. Kuzmenko

55–68
- PDF (Ukrainian)
Information and computing system for modeling gas hydrate dissociation in coal seams

R. Lysenko

69–84
- PDF (Ukrainian)
Study of the relationship between the mining regime and the productivity of iron ore open pits

S. Lutsenko, Yu. Hryhoriev, S. Zhukov, S. Kalchuk

85–93
- PDF (Ukrainian)
Analysis of global and national practices of implementing circular economy principles in underground coal mining

D. Malashkevych, I. Sheka, D. Lantukh

94–114
- PDF
Theoretical and applied aspects of forming a deposit control system in trunk pipelines

V. Rastsvietaiev, O. Pashchenko, V. Yavorska, D. Yashyn

115–128
- PDF (Ukrainian)
Spatial optimization of the development workings system based on a three-dimensional geological-mathematical model under the conditions of the mine “Samarska”

V. Ruskih, A. Cherep, O. Haidai

129–144
- PDF (Ukrainian)
Technological aspect of forming internal open pits edge embankment by ejection blasting

D. Titov

145–156
- PDF (Ukrainian)
Characteristics of the mechanism of sinkhole in coal-bearing regions

A. Feofanov

157–170
- PDF (Ukrainian)
Modeling the dynamics of production processes in a longwall face based on the application of colored Petri nets

A. Khorolskyi

171–185
- PDF (Ukrainian)
Analysis of the effectiveness of questionnaires for assessing psychosocial risks in the workplace of miners

V. Tsopa, S. Cheberyachko, T. Bilko, O. Stolbchenko

186–200
- PDF (Ukrainian)
Substantiation of a scheme for using metro drainage groundwater for industrial water supply

O. Yavorska, Ye. Koroviaka, V. Khomenko

201–216
- PDF (Ukrainian)

CONSTRUCTION AND CIVIL ENGINEERING

Methodology of field testing and analytical assessment of the residual load-bearing capacity of reinforced concrete structures after fire

D. Zeziukov, M. Makhinko

217–229
- PDF (Ukrainian)
Numerical simulation of combined penetration and explosion effects on the two-layer roof of shallow-buried critical infrastructure protective structures

N. Zuievska, V. Berezdetskyi, D. Darmostuk, R. Semchuk, O. Khalymendyk

230–245
- PDF
Organizational and technological foundations for selecting a method of filling openings in frame civil buildings

D. Nechepurenko, I. Danylenko

246–263
- PDF (Ukrainian)
Strength of reinforced block structures for civil infrastructure protection

A. Sudakov, S. Fedoriachenko, M. Kononenko, Ye. Piliuhin, K. Kravchenko

264–274
- PDF (Ukrainian)
Geomechanical prerequisites for developing underground critical infrastructure based on the experience of deep mine operation

O. Tymchenko, V. Yanko

275–285
- PDF (Ukrainian)
Methodology for assessing geotechnical risks of urban development under wartime impacts and territorial recovery

O. Shashenko, V. Shapoval, N. Khoziaikina, K. Zhabchyk

286–299
- PDF (Ukrainian)

MECHANICAL ENGINEERING

Evaluation of the interaction between the “mechanized support – rock mass” system to determine optimal advancement rates for the working face

S. Buriak, V. Medianyk, V. Bondarenko

300–308
- PDF (Ukrainian)
Analysis of technological factors affecting corrosion aggressiveness in gas condensate wells and substantiation of controllable operating parameters

Yu. Hrytsiv, M. Beskhmelnitsyn, R. Rachkevych, I. Yatsyniak, O. Hrytsiv

309–319
- PDF (Ukrainian)
Statistical and tribomechanical modeling of loading and wear of austenitic steel medical instruments during root canal preparation

O. Dolgov, Y. Slupska, O. Naumenko

320–329
- PDF (Ukrainian)
Use of generative artificial intelligence in solving technical engineering tasks in design

K. Ziborov, D. Laukhin, I. Verner, O. Tverdokhlib

330–339
- PDF (Ukrainian)
Modeling the stress-strain state of a dynamic implant for vertebral stabilization with an intermediate elastic element

D. Kolosov, S. Onyshchenko, S. Panchenko, O. Linnyk, P. Chernysh, D. Nievierov

340–350
- PDF (Ukrainian)

ENVIRONMENTAL PROTECTION TECHNOLOGIES

Assessment of the environmental hazard posed by heavy metal contamination of bottom sediments in the drained Kakhovka Reservoir and justification of remediation measures

Yu. Voitenko, T. Rusakova, O. Zolotko, O. Dolzhenkova, O. Gunko

351–364
- PDF (Ukrainian)
Environmental assessment of soil contamination along tram tracks in the Dnipro city using biotesting method

O. Kovrov, Yu. Ishchenko, A. Bohun, V. Tur, V. Fedotov

365–377
- PDF (Ukrainian)
A probabilistic model for reconciling circularity and climate performance in steel-slag processing

P. Lomazov, V. Soroka

378–393
- PDF (Ukrainian)
Justification for the implementation of a continuous monitoring system for pollutant emissions at industrial facilities with high environmental risk

I. Myronova, O. Borysovska, Yu. Kryvoruchkina, A. Rudchenko

394–406
- PDF (Ukrainian)
Environmental and technological criteria for selecting a zinc and manganese leaching method for spent batteries

V. Chaika, A. Pavlychenko

407–417
- PDF (Ukrainian)
SWOT-analysis of the possibility for achieving sustainable development in galvanic production in Ukraine

T. Yakovyshyna, A. Nester

418–430
- PDF (Ukrainian)

View All Issues